Figure 6.42. Assign a name to your new profile.

4. You should see a white box, with two darker boxes inside it (the center box may be difficult to see, as it is a very dark gray). Follow the instructions shown in the dialog box in Figure 6.43, and set your monitor's contrast control to its highest setting. Then adjust the brightness control to make the center box dark, but not totally black. Then, click Next to move to the next dialog box.

Figure 6.43. Set your monitor's brightness to its highest setting, then adjust the brightness control until the center box is dark.

Figure 6.43. Set your monitor's brightness to its highest setting, then adjust the brightness control until the center box is dark.

5. In the dialog box shown in Figure 6.44, you'll need to select the type of phosphors that your monitor uses. You may want to check the manual that came with your monitor to see if the phosphors indicated match anything on the list. If you're working with a profile provided by your monitor vendor, the type of phosphors will already be correct. Click the Next button to proceed.

0 0

Post a comment